Part Number Hot Search : 
151DH 53225 BU2508 CLM2850 01907 4000B RC288 MT240
Product Description
Full Text Search
 

To Download HT17E12-200 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  data sheet provided by mass integrated massintegrated.com ? displayalliance.com please call +1.978.465.6190 email: sales@massintegrated.com iso 9001: 2008 mass integrated complies with all dmca takedown notices. please send a formal dmca takedown notice to mass integrated s ystems, inc. ?18 h enry graf jr. road, unit 1 ?newburyport, ma 01950. www.datasheet.co.kr datasheet pdf - http://www..net/
proprietary note this specification is the property of boe-hydis and shall not be reproduced or copied without the written permission of boe-hydis and must be returned to boe-hydis upon its request. title: HT17E12-200 product specification (for customer) rev. a spec. number s864-1118 product group tft-lcd product rev. a issue date 2002.10.31 page 1 of 24 rasr 055-2 a4 (210 x 297) www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 revision history rev. ecn no. description of changes date prepared 0 initial release 02.10.12 s.s.yun a e210-f005 change the mechanical tolerance of user hole. 02.10.31 y.w.son insert viewing angle spec when cr>5 . change the cr typical value. insert typical value of lamp start up voltage. notice 6 bit frc driving method. page spec. number s864-1118 spec. title HT17E12-200 product specification 2 of 24 rasr 056-1 a4 (210 x 297) www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 3 of 24 rasr 057-1 a4 (210 x 297) contents no. item page 1.0 general description 4 2.0 absolute maximum ratings 6 3.0 electrical specifications 7 4.0 optical specifications 8 5.0 interface connection 10 6.0 signal timing specifications 12 7.0 signal timing waveforms of interface signal 14 8.0 input signals, display colors & gray scale of colors 15 9.0 power sequence 16 10.0 mechanical characteristics 17 11.0 reliability test 18 12.0 handling & cautions 19 13.0 product serial number 20 14.0 appendix 21 www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 4 of 24 rasr 057-1 a4 (210 x 297) 1.0 general description 1.1 introduction HT17E12-200 is a color active matrix tft lcd module using amorphous silicon tft's (thin film transistors) as an active switching devices. this module has a 17.0 inch diagonally measured active area with sxga resolutions ( 1280 horizontal by 1024 vertical pixel array). each pixel is divided into red, green, blue dots which are arranged in vertical stripe and this module can display 16,194,227 colors. the tft- lcd panel used for this module is adapted for a low reflection and higher color type. 1.2 features z lvds interface with 2 pixel / clock z high-speed response z low power consumption z 6-bit (frc) color depth, display 16,194,227 colors z incorporated edge type back-light (four lamps) z high luminance and contrast ratio, lo w reflection and wide viewing angle z de (data enable) mode 1.3 applications z desktop type of pc & workstation use z slim-size display for stand-alone monitor z display terminals for control system z monitors for process controller gate driver source driver tft lcd panel 1280 ?? 1024 lvds rx + timing controller dc/dc gamma vcom connector (cn1) lvds input signal vdd cn22 cn21 cn23 cn24 www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 5 of 24 rasr 057-1 a4 (210 x 297) 1.4 general specifications the followings are general specifications at the model HT17E12-200 parameter specification unit remarks active area 337.92 (h) ?? 270.336(v) mm number of pixels 1280(h) ?? 1024(v) pixels pixel pitch 0.264(h) ?? 0.264(v) mm pixel arrangement rgb vertical stripe display colors 16,194,227 colors display mode normally white dimensional outline 358.5(h) ?? 296.5(v) ?? 17.0(d) typ. mm weight 1900 max. gram back-light top/bottom edge side 4-ccfl type note 1 note: 1. ccfl (cold cathode fluorescent lamp) www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 6 of 24 rasr 057-1 a4 (210 x 297) 2.0 absolute maximum ratings the followings are maximum values which, if exceed , may cause faulty operation or damage to the unit. the operational and non-operational maximum vo ltage and current values are listed in table 2.
[vss = gnd =0v] parameter symbol min max unit remarks power input voltage v dd vss-0.5 6.5 v logic input voltage v in vss-0.3 v dd +0.3 v ta = 25 ? back-light lamp current i bl 37ma back-light lamp frequency f l 30 (80) khz operating temperature t op 0+50 ? 1) storage temperature t st -20 +60 ? 1) notes : 1) temperature and relative hum idity range are shown in the figure below. wet bulb temperature should be 39 ? max. and no condensation of water. 0 20 40 60 80 -2 0 5 20 40 60 80 90 100 operating range storage range relative humidity (%rh) temperature (ac) www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 7 of 24 rasr 057-1 a4 (210 x 297) 3.0 electrical specifications < table 3. electrical specifications > [ta = 25 ?? 2 ? ] parameter min typ max unit remarks power supply voltage v dd 4.5 5.0 5.5 v power supply current i dd - 580 700 ma note1 permissible input ripple voltage v rf 100 mv v dd = 5.0v high level differential input threshold voltage v ih - +100 mv low level differential input threshold voltage v il -100 - mv vcm = 1.2v typ. back-light lamp voltage v bl 690 700 840 v rms back-light lamp current i bl 3.0 6.5 7.0 ma rms back-light lamp operating frequency f l 30 - 70 khz note 2 940 1170 v rms 25 ? , note 3 lamp start voltage 1340 1570 v rms 0 ? , note 3 lamp life 40000 50000 hrs i bl = 6.5ma p d 2.9 w p bl 18.2 w i bl = 6.5ma, note 4 power consumption p total 21.1 w notes: 1. the supply voltage is measured and specifi ed at the interface connector of lcm. the current draw and power consumption specified is for vdd = 5.0v, frame rate= 75hz and clock frequency = 67.5mhz. test pattern of power supply current a) typ : black pattern b) max : dot pattern 2. the lamp frequency should be selected as different as possible from the horizontal synchronous frequency and its harmonics to avoid interference, which may cause line flow on the display 3. the voltage above this value should be app lied to the lamps for more than 1 second to start-up. otherwise the lamps may not be turned on. 4. calculated value for reference (v bl ?? i bl ) ?? 4 excluding inverter loss. www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 8 of 24 rasr 057-1 a4 (210 x 297) 4.0 optical specifications 4.1 overview the test of optical specifications shall be m easured in a dark room (ambient luminance 1 lux and temperature = 25 2 c) with the equipment of luminance meter system (goniometer system and topcon bm-5) and test unit shall be located at an approximate distance 50cm from the lcd surface at a viewing angle of and equal to 0 . we refer to =0 (= 3 ) as the 3 o?clock direction (the ?right?), =90 (= 12 ) as the 12 o?clock direction (?upward?), =180 (= 9 ) as the 9 o?clock direction (?left?) and =270 (= 6 ) as the 6 o?clock direction (?bottom?). while scanning and/or , the center of the measuring spot on the display surface shall stay fixed. the measurement shall be executed after 30 minutes warm-up period. vdd shall be 5.0v +/- 10% at 25 c. optimum viewing angle direction is 6 o?clock. 4.2 optical specifications [vdd=5.0v, frame rate=60hz, clock=54mhz, i bl = 6.5ma, ta = 25 ?? 2 ? ] parameter symbol condition min typ max unit remark 3 75 80 - deg horizontal 9 75 80 - deg 12 60 65 - deg vertical 6 cr > 10 60 65 - deg 3 80 85 - deg horizontal 9 80 85 - deg 12 70 75 - deg viewing angle vertical 6 cr > 5 70 75 - deg note 1 luminance contrast ratio cr 350 430 - note 2 luminance of white y w 200 250 - cd/m 2 note 3 white luminance uniformity ? y - - 1.2 note 4 wx 0.270 0.300 0.330 white wy 0.305 0.335 0.365 rx 0.599 0.629 0.659 red ry 0.324 0.354 0.384 gx 0.257 0.287 0.317 green gy 0.568 0.598 0.628 bx 0.115 0.145 0.175 reproduction of color blue by 0.073 0.103 0.133 note 5 tr - 5 response time td - 15 30 msec note 6 cross talk ct = 0 (center) normal viewing angle --2.0%note 7 www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 9 of 24 rasr 057-1 a4 (210 x 297) note: 1. viewing angle is the angle at which the contrast ratio is greater than 10. the viewing are determined for the horizontal or 3, 9 o?clock dir ection and the vertical or 6, 12 o?clock direction with respect to the optical axis which is normal to the lcd surface. 2. contrast measurements shall be made at viewing angle of = 0 and at the center of the lcd surface. luminance shall be measured with all pixels in the view field set first to white, then to the dark (black) state. (see figure 1 shown in appendix) luminance contrast ratio (cr) is defined mathematically. luminance when displaying a white raster cr = luminance when displaying a black raster 3. center luminance of white is defined as the lcd surface. luminance shall be measured with all pixels in the view field set first to white. this measurement shall be taken at the locations shown in figure 2 for a total of the measurements per display. 4. the white luminance uniformity on lcd surface is then expressed as : ? y = maximum luminance of five points / minimum luminance of five points (see figure 2 shown in appendix). 5. the color chromaticity coordinates specified in table 4. shall be calculated from the spectral data measured with all pixels first in red, gr een, blue and white. measurements shall be made at the center of the panel. 6. the electro-optical response time measurements shall be made as figure 3 shown in appendix by switching the ?data? input signal on and off. the times needed for the luminance to change from 10% to 90% is td, and 90% to 10% is tr. 7. cross-talk of one area of the lcd surface by another shall be measured by comparing the luminance (y a ) of a 25mm diameter area, with all display pixels set to a gray level, to the luminance (y b ) of that same area when any adjacent ar ea is driven dark. (see figure 4 shown in appendix). www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 10 of 24 rasr 057-1 a4 (210 x 297) 5.0 interface connection 5.1 electrical interface connection z cn11: module side connector : fi-xb30s-hf (jae) or equivalent user side connector : fi-x30h-hf (jae) or equivalent pin no symbol function remark 1 rxo0- lvds odd 0 ? signal 2 rxo0+ lvds odd 0 + signal 3 rxo1- lvds odd 1 ? signal 4 rxo1+ lvds odd 1 + signal 5 rxo2- lvds odd 2 ? signal 6 rxo2+ lvds odd 2 + signal 7 gnd ground 8 rxoclk- lvds odd clock ? signal 9 rxoclk+ lvds odd clcok + signal 10 rxo3- lvds odd 3 ? signal 11 rxo3+ lvds odd 3 + signal 12 rxe0- lvds even 0 ? signal 13 rxe0+ lvds even 0 + signal 14 gnd ground 15 rxe1- lvds even 1 ? signal 16 rxe1+ lvds even 1 + signal 17 gnd ground 18 rxe2- lvds even 2 ? signal 19 rxe2+ lvds even 2 + signal 20 rxeclk- lvds even clock ? signal 21 rxeclk+ lvds even clock + signal 22 rxe3- lvds even 3 ? signal 23 rxe3+ lvds even 3 + signal 24 gnd ground 25 nc no conection 26 de no conection 27 nc no conection 28 vdd 29 vdd 30 vdd power supply (+5.0v) www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 11 of 24 rasr 057-1 a4 (210 x 297) 5.2 lvds interface (tx : thc63lvdf83a or equivalent) transmitter interface fi-x30s-hf input signal pin no pin no system (tx) tft-lcd (rx) pin no. remark or0 51 or1 52 or2 54 or3 55 or4 56 or5 3 og0 4 48 47 out0- out0+ rxo0- rxo0+ 1 2 og1 6 og2 7 og3 11 og4 12 og5 14 ob0 15 ob1 19 46 45 out1- out1+ rxo1- rxo1+ 3 4 ob2 20 ob3 22 ob4 23 ob5 24 hsync 27 vsync 28 de 30 42 41 out2- out2+ rxo2- rxo2+ 5 6 mclk 31 40 clkout- rxo clk- 8 39 clkout+ rxo clk+ 9 or6 50 or7 2 og6 8 og7 10 ob6 16 ob7 18 o d d l v d s rsvd 25 38 37 out3+ out3- rxo3- rxo3+ 10 11 er0 51 er1 52 er2 54 er3 55 er4 56 er5 3 eg0 4 48 47 out0- out0+ rxe0- rxe0+ 12 13 eg1 6 eg2 7 eg3 11 eg4 12 eg5 14 eb0 15 eb1 19 46 45 out1- out1+ rxe1- rxe1+ 15 16 eb2 20 eb3 22 eb4 23 eb5 24 hsync 27 vsync 28 de 30 42 41 out2- out2+ rxe2- rxe2+ 18 19 mclk 31 40 clkout- rxe clk- 20 39 clkout+ rxe clk+ 21 er6 50 er7 2 eg6 8 eg7 10 eb6 16 eb7 18 e v e n l v d s rsvd 25 38 37 out3+ out3- rxe3- rxe3+ 22 23 www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 12 of 24 rasr 057-1 a4 (210 x 297) 5.3 data input format odd even rgbrgb rgbrgb 1 pixel = 3 dots rgb rgbrgb rgbrgb display position of input data (v-h) 5.4 back-light interface connection z cn21, 22, 23, 24: module side connector : bhsr-02vs-1 (jst) user side connector : sm02b-bh ss-1-tb (jst) or equivalent pin no input color function 1 hot pink & white high voltage 2 cold black & white ground 6.0 signal timing specifications 6.1 the HT17E12-200 is operated by the only de (data enable) mode (lvds transmitter input) item symbols min typ max unit frequency 1/tc 40 54 68 mhz high time tch 5 - - ns clock low time tcl 5 - - ns setup time tds 4 - - ns data hold time tdh 4 - - ns data enable setup time tes 4 - - ns 1032 1066 1536 lines frame period tv 13.33 16.67 - msec vertical display period tvd - 1024 - lines one line scanning period th 672 844 1022 clocks horizontal display period thd 640 640 640 clocks (1,1) (2,1) ( 1279 , 1 ) ( 1280 , 1 ) (1,1024) (2,1024) ( 1279 , 1024 ) ( 1280 , 1024 ) www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 13 of 24 rasr 057-1 a4 (210 x 297) trip2 6.2 lvds rx interface timing parameter the specification of the lvds rx interface timing parameter is shown in table 4. < table 4. lvds rx interface timing specification> item symbol min typ max unit remark clkin period trcip 14.7 18.5 - nsec clk difference tcdiff -trcip*(3/7) 0 +trcip*(3/7) nsec input data 0 trip1 -0.4 0 +0.4 nsec input data 1 trip0 1*tricp/7-0.4 1*tricp/7 1*tricp/7+0.4 nsec input data 2 trip6 2*tricp/7-0.4 2*tricp/7 2*tricp/7+0.4 nsec input data 3 trip5 3*tricp/7-0.4 3*tricp/7 3*tricp/7+0.4 nsec input data 4 trip4 4*tricp/7-0.4 4*tricp/7 4*tricp/7+0.4 nsec input data 5 trip3 5*tricp/7-0.4 5*tricp/7 5*tricp/7+0.4 nsec input data 6 trip2 6*tricp/7-0.4 6*tricp/7 6*tricp/7+0.4 nsec trip3 trip4 trip5 trip6 trip0 trip1 rx2 rx1 rx0 rx6 rx5 rx4 rx3 rx2 rx1 rx0 rx3 trcip vdiff=0[v] vdiff=0[v] rxoclk+ rxo/ez +/- * z=0, 1, 2, 3 * vdiff = (rxo/ez+)-(rxo/ez-), ?.. , (rxo/eclk+)-(rxo/eclk-) tcdiff rxeclk+ www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 14 of 24 rasr 057-1 a4 (210 x 297) 7.0 signal timing waveforms of interface signal 7.1 vertical timing waveforms 7.2 horizontal timing waveforms mclk enab x,1 x,2 x,y x+1,1 x,1024 invalid data data invalid th tv tvd r7 ~ r0 g7 ~ g0 b7 ~ b0 mclk enab d1 d2 dn data d1 d2 d3 invalid d638 d639 d640 th thd tc ra7 ~ra0 ga7 ~ga0 ba7 ~ba0 tch tcl tdh tds 2.0v 0.8v 2.0v 0.8v tes 2.0v mclk valid data data enab 1.5v www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 15 of 24 rasr 057-1 a4 (210 x 297) 8.0 input signals, basic display colors & gray scale of colors red data green data blue data colors & gray scale r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 black 000000000000000000000000 blue 000000000000000011111111 green 000000001111111100000000 cyan 000000001111111111111111 red 111111110000000000000000 magenta 111111110000000000111111 yellow 111111111111111100000000 basic colors white 111111111111111111111111 black 000000000000000000000000 ?a 000000010000000000000000 darker 000000100000000000000000 ?a??? ????? brighter 111111010000000000000000 ?? 111111100000000000000000 gray scale of red red 111111110000000000000000 black 000000000000000000000000 ?a 000000000000000100000000 darker 000000000000001000000000 ?a??? ????? brighter 000000001111110100000000 ?? 000000001111111000000000 gray scale of green green 000000001111111100000000 black 000000000000000000000000 ?a 000000000000000000000001 darker 000000000000000000000010 ?a??? ????? brighter 000000000000000011111101 ?? 000000000000000011111110 gray scale of blue blue 000000000000000011111111 black 000000000000000000000000 ?a 000000010000000100000001 darker 000000100000001000000010 ?a??? ????? brighter 111111011111110111111101 ?? 111111101111111011111110 gray scale of white & black white 111111111111111111111111 www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 16 of 24 rasr 057-1 a4 (210 x 297) 9.0 power sequence to prevent a latch-up or dc operation of the lcd module, the power on/off sequence should be as shown in below z 0 < t1 10 ms z 20 ms < t2 50 ms z 500 ms t3 z 100 ms t4 z 0 < t5 50 ms z 1 sec t6 notes: 1. when the power supply vdd is 0v, keep the level of input signals on the low or keep high impedance. 2. do not keep the interface signal high impedance when power is on. 3. back light must be turn on after power for logic and interface signal are valid. t1 power supply interface signal back- light valid t2 t5 t3 t4 0.9vdd 0.1vdd 0.9vdd 0.1vdd 0v 0v 0v t6 www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 17 of 24 rasr 057-1 a4 (210 x 297) 10.0 mechanical characteristics 10.1 dimensional requirements figure 6 shown in appendix shows mechani cal outlines for the model HT17E12-200. other parameters are shown in table 5.
parameter specification unit dimensional outline horizontal vertical thickness 358.5 ?? 0.5 296.5 ?? 0.5 17.0 ?? 0.5 mm weight 1900 max. gram active area 337.92 (h) ?? 270.336(v) mm pixel pitch 0.264(h) ?? 0.264(v) mm number of pixels 1280(h) ?? 1024(v) (1 pixel = r + g + b dot) pixels back-light top / bottom edge side 4-ccfl type 10.2 mounting see figure 5 shown in appendix 10.3 anti-glare and polarizer hardness. the surface of the lcd has an anti-glare coating to minimize reflection and a coating to reduce scratching. 10.4 light leakage there shall not be visible light from the back- lighting system around the edges of the screen as seen from a distance 50[cm] from the screen with an overhead light level of 350[lux]. the manufacture shall furnish limit samples of the panel showing the lightest leakage acceptable. www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 18 of 24 rasr 057-1 a4 (210 x 297) 11.0 reliability test the reliability test items and its conditions are shown in below.
no test items conditions 1 high temperature storage test ta = 60 c, 240 hrs 2 low temperature storage test ta = -20 c, 240 hrs 3 high temperature & high humidity operation test ta = 50 c, 80 %rh, 240 hrs 4 high temperature operation test ta = 50 c, 240 hrs 5 low temperature operation test ta = 0 c, 240 hrs 6 thermal shock ta = -20 c ? 60 c (30 min), 100 cycle 7 vibration test (non-operating) frequency gravity/amp period : 10 ~ 300 hz, sweep rate 30min : 1.5g : ?? x, ?? y, ?? z 30min 8 shock test (non-operating) gravity pulse width : 70g : 11ms, sine wave x, y, z once for each direction 9 electrostatic discharge test air contact : 150 pf, 330 ? , 15kv : 150 pf, 330 ? , 8kv www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 19 of 24 rasr 057-1 a4 (210 x 297) 12.0 handling & cautions 12.1 cautions when taking out the module y pick the pouch only, when taking out module from a shipping package. 12.2 cautions for handling the module y as the electrostatic discharges may break the lcd module, handle the lcd module with care. peel a protection sheet off from th e lcd panel surface as slowly as possible. y as the lcd panel and back-light element are made from fragile glass material, impulse and pressure to the lcd module should be avoided. y as the surface of the polarizer is very so ft and easily scratched, use a soft dry-cloth without chemicals for cleaning. y do not pull the interface connector in or out while the lcd module is operating. y put the module display side down on a flat horizontal plane. y handle connectors and cables with care. 12.3 cautions for the operation y when the module is operating, do not lose lvds signals. if any one of these signals were lost, the lcd panel would be damaged. y obey the supply voltage sequence. if th e wrong sequences were applied, the module would be damaged. 12.4 cautions for the atmosphere y dewdrop atmosphere should be avoided. y do not store and/or operate the lcd module in a high temperature and/or humidity atmosphere. storage in an electro -conductive polymer-packing pouch and under relatively low temperature atmosphere is recommended. 12.5 cautions for the module characteristics y do not apply fixed pattern data signal to the lcd module at aging time. y applying fixed pattern for a long time may cause image sticking. 12.6 other cautions y do not disassemble and/or re-assemble lcd module. y do not re-adjust variable resistor or switch etc. y when returning the module for repair or etc, please pack the module not to be broken. we recommend on using the original shipping packages . www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 20 of 24 rasr 057-1 a4 (210 x 297) 13.0 product serial number type de signation no 1. control number no 2. rank / grade no 3. year (01 : 2001, 02 : 2002, ?) no 4. month (1, 2, 3,?, 9, x, y, z) no 5. product identification no 6. serial number x x x x x x 2 0 0 x x x x x x x x 1 2 3 4 5 6 - HT17E12-200 xxxxxx200xxxxxxxx www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 21 of 24 rasr 057-1 a4 (210 x 297) 14.0 appendix figure 1. measurement set up (l = 50cm) figure 2. average luminance measurement lo cations & uniformity measurement locations column 320 640 960 row 23 256 1 512 45 768 www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 22 of 24 rasr 057-1 a4 (210 x 297) figure 3. response time testing figure 4. cross modulation test description y b - y a cross-talk = y a ?? 100 where: y a = initial luminance of measured area (cd/m 2 ) y b = subsequent luminance of measured area (cd/m 2 ) the location measured will be exactly the same in both patterns. v ie w area y a ( 112 0, 5 12 ) 3 2 0, 2 56 3 2 0, 768 960, 768 960, 2 56 y b ( 112 0, 5 12 ) v ie w area tft off(white) tft on(black) t ft o ff(w hite) tr 100% 90% 10% 0% td www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 23 of 24 rasr 057-1 a4 (210 x 297) figure 5. tft-lcd module outline dimensions (front view) www.datasheet.co.kr datasheet pdf - http://www..net/
product group rev. issue date tft-lcd product a 2002.10.31 page spec. number s864-1118 spec. title HT17E12-200 product specification 24 of 24 rasr 057-1 a4 (210 x 297) figure 6. tft-lcd module outline dimensions (rear view) www.datasheet.co.kr datasheet pdf - http://www..net/


▲Up To Search▲   

 
Price & Availability of HT17E12-200

All Rights Reserved © IC-ON-LINE 2003 - 2022  

 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X